Our 10 Best Rear Seat Lift Kits For Chevy – Top Product Reviwed

Features :

• FULL 360-DEGREE view around your truck with added lift kit for driver-side or passenger-side front. Includes two each ½”, 1” and 1.5” Blocks. Use any combination to create multiple height configurations to suit your preference.
• BETTER VANTAGE for snowplowing, towing, and hauling trailers. GREAT GIFT for your wife or girlfriend who drives a truck (or if you’re a little short!)
• INCREASE COMFORT for your ride. No more straining your neck to see over hood or tailgate.
• FITS/COMPATIBLE WITH Chevy Silverado’s and GMC Sierra’s 1500, 2500, 3500 model years 2020+  Please verify fitment before buying. NOTE: Will have to remove factory plastic, and use double-sided tape to re-install.
• 100% Made in Ohio, USA. with CNC Machined Billet-6061 Aluminum. Includes all Grade 8 Fasteners. 10-20 Minute installation, no special tools required. Painted Black to match common interior colors.

Features :

• 4 Hole sizes from 6.3Mm(1/4″), 8mm(5/16″ ), 9mm(23/64″ ), 10mm(25/64″ ).
• 6 different Push pin rivet for many brand vehicles.
• Great material – these bumper clips are made of high-quality Black nylon Material, anti-wear and anti-corrosion, would not break or crack easily during use.
• Widely application – these Push clips are widely used for trim panel clips, door trim clips, door Panel clips, bumper clips, fender clips, engine cover and splash shield retainers replacement. It always covers some applications include telecom equipment, motor vehicles, domestic appliances, furniture and electrical equipment.
• PACKAGE INCLUDED:120PCS 6.3mm 8mm 9mm 10mm Bumper Push Rivet Clips,1PC Fastener Remover

Features :

• Will Raise the rear of your SUV by 2″.
• Motofab Lifts are CNC machined out of billet aluminum then anodized black to match your factory suspension.
• Made In The USA and comes with a Lifetime warranty
• Fits:01-18 Chevy Avalanche , 01-18 Chevy Tahoe , 01-18 Chevy suburban ,
• Fits: 02-09 Chevy trailblazer , 02-18 GMC Envoy , 02-18 GMC Yukon , 03-09 Hummer H2

Features :

• Made of super durable plastic material for long-time usage. Ergonomic design with super lightweight, easy handheld features which effectively effort saving for various interior and exterior car trimming in the shortest time.
• Great for car audio/radio system installing or removing, door panel, moldings, window trims or automotive interior repairing and furniture restoration.
• Package includes 4 plastic panel removal tool + 1 fastener remover to facilitate your needs when repairing. A professional tool kit that is sturdy and easy to use.
• Made of impact resistant nylon fiber material with matte surface treatment, tougher than common ABS one, it is eco-friendly, non-toxic and breakage-proof.
• All tools are molded according to car trimming needs on the market, moderate curve that is not sharp, anti-scratches and harmless to car paint in the whole modification [Universal Application] This multi-functional combination tool set designed for all models of cars, boats, and rvs trimming jobs with variety of shapes and sizes, even for hard to reach areas.

Features :

• Large compartment: Easily store jumper cables, tools, recovery gear, medical kit, hunting gear underseat. 4 PE removable padded dividers, glued to the inner wall by Velcro. 6 velcro or elastic bands on the bottom and both sides, used to reinforce thing when needed. Large mesh zipper pocket on top, 2 mesh pock on both side.
• outside space: 2 zippered pockets with Molle webbing （for attaching additional tactical pouches) & Pu leather logo in the front, 2 side zipper pockets offer extra space for small objects. At the back, we designed 2 straps with a buckle to carry things, such as an umbrella
• Tote bag & backpack: When things are fragmented and heavy, carry them in tote way for short-distance movement. (Note: too heavy, in the way of backpack, put vertically, the PE board may not be able to withstand the full weight) For longer items, such as shovel, fishing rod, rifle, etc. or lighter things, you can carry it in backpack way.
• Humanized design: 4 anti-slip feet on the bottom of the bag, So it can stay firmly concealed under the seat. Side short handle straps make it easy to move whether under the seat or in the bed of your truck no need to lift the seat.
• Designed to fit under most full size truck back seats（not big enough for16 GMC 2500hd） . Please measure the space under the seats of your truck before purchasing.

Features :

• 4 Hole sizes from 6.3mm(1/4″), 8mm(5/16″ ), 9mm(23/64″ ), 10mm(25/64″ ). Six kinds of different push pin rivet for many brand vehicles.
• High-quality nylon material: These car clips are made of high-quality black nylon material, which has anti-wear and anti-corrosion effects. This push-in cage kit will not easily break or rupture during use.
• Wide range of applications: Push-in cage kits, with 12 common sizes, widely used in automotive panels, decorative panel clips, door trim clips, door panel clips, bumper clips, fender panel clips, hoods The replacement of the splash plate holder is common to most models and is fit for Ford Toyota Acura GMC Chrysler Lexus etc.
• Easy to install: The product is equipped with a screwdriver, easy to operate, easy to install and remove. Small size, easy to store or carry around.
• BUY WITH CONFIDENCE: Any other problem please feel free to contact us, we are always here to satisfy all of you.

Features :

• 【NOTE】Will raise your truck 2″ in the rear. ( If your truck has 1″ OEM blocks, you can only raise an additional 1″. )
• 【FITMENT】Compatible with 1999-2017 Chvey Silverado (2WD 4WD) / GMC Sierra1500 (2WD 4WD)
• 【BENEFITS】The Forged leveling kit makes the front and rear of the vehicle flush. Increased ground clearance, Make the truck look more aggressive. You can install taller and larger rims/tires.
• 【FEATURES】The lift kit is forged from lightweight aluminum, stronger and durable. With 12.9 grade pre-installed bolts. Rugged and lightweight are more safe and reliable
• 【INSTALLATION】Lifetime Warranty. Easy installation, about 1-2 hours. However, Professional installation is recommended

Features :

• 【COMPATIBILITY】- The CNC Machined seat spacer kit is compatible with 2005-2020 Toyota Tacoma or 2007-2014 FJ Cruiser. GREAT GIFT for your wife or girlfriend who drives the vehicle in these models.
• 【BETTER EXPERIENCE】- This riser kit lifts the rear two feet of the driver or passenger seat by 1 inch, providing a more level seat bottom, a more comfortable seating angle and audio amp space.You will feel like you are driving a truck instead of a Camry or sports car because it provides a slightly better view over the dash and hood of your truck. Enjoy FULL 360-DEGREE view around your truck with this added lift kit.
• 【QUALITY】- Made of better grade 6061 aluminum, this seat lifting kit is lightweight and strong. A much better and more secure option than simple round spacers. Not a plastic spacer. Including longer high grade 10.9 flange bolts with 150,000 psi tensile strength, are greatly stronger than stock Toyota seat bolts. Contour machined to fit the shape of the seat anchors.
• 【INSTALLATION】- Installation is quick and easy! Just 5 minutes using just a ratchet with a 14mm socket. Painted Black to match common interior colors.
• 【PACKAGE INCLUDED】- This kit will lift one seat. Another kit would be needed to lift the passenger seat. This kit includes everything you will need – 2 Bracket Seat Spacers and 2 Strength Bolts . All metric fasteners are equal in strength to the OEM specifications.

Features :

• FULL 360-DEGREE view around your truck with added 1.5” lift kit for driver-side or passenger-side front. Includes four 1.5” Blocks for a straight up rise.
• BETTER VANTAGE for snowplowing, towing, and hauling trailers. GREAT GIFT for your wife or girlfriend who drives a truck (or if you’re a little short!)
• INCREASE COMFORT for your ride. No more straining your neck to see over hood or tailgate.
• FITS Chevy Silverado’s and GMC Sierra’s model years 2014-2019 and 1500, 2500, 3500. NOT compatible work with power seats! NOT compatible on some GMC’s with J-style brackets. On some trucks you may need to use a 3/8″ drill to open up the factory holes to fit the supplied 3/8″ bolts through! PLEASE READ FULL FITMENT DETAILS BELOW AND REVIEW ALL PICTURES.
• 100% Made in Ohio, USA. with CNC Machined Billet-6061 Aluminum. Includes all Grade 8 Fasteners. 10-20 Minute installation, no special tools required. Painted Black to match common interior colors.

Features :

• Will Raise your truck 2″ in the rear
• Motofab Lifts are powdercoated black to match your factory suspension.
• Can be installed in about 1 hour
• Made In The USA and comes with a Lifetime warranty
• Compatible with 2007-2018 Silverado / Sierra Pickups